Search academic texts

Information × Registration Number 0212U004793, 0110U002170 , R & D reports Title Production technology of structural heat insolation cell concrete with technological wastes use popup.stage_title Head Vasily Serdyk, Доктор технічних наук Registration Date 26-01-2012 Organization Vinnitsa National Technical University popup.description2 Confirmed the possibility of obtaining low-clinker binder using local raw materials and by-products of industrial production for manufacturing design and insulation building material.Experimentally established that the joint use of ash and ash-phosphogypsum, with pre-exposed mixture, providing compression gain strength to 25-35% compared with control samples. A formulation and technological parameters of manufacturing clinker was ash-phosphogypsum-cement binder with a high content of hydro-hidrosylikativ and aluminates of calcium in the structure of samples with high water resistance (Кр = 0.7). There was optimization formulation and technological parameters of production design and insulating cellular concrete. It was found that after processing samples Thermomoist optimized storage of raw mixture strength at compression models wall materials ranges from 17.5 to 29.7 MPa, and bending strength - ranging from 2.9 to 4.8 MPa. Depending on the space variation formulation and technological parameters of manufacturing molding compounds - the average density of samples of wall materials foamy structure varies from 580 to 780 kg/m3, while the compressive strength of samples is under 17 - 22 kgf/cm2. Product Description popup.authors Іванова Наталія Леонідівна Бікс Юрій Семенович Ковальський Віктор Павлович Лемешев Михайло Степанович Лось Олена Петрівна Сердюк Василь Романович Франишина Світлана Юріївна Христич Олександр Володимирович popup.nrat_date 2020-04-02 Close