Total number
Full text
Total number
Full text
Number of local repositories
Full text
0214U008574,
0113U002377
,
Rendering of the scientific and technical help on hydrodynamic influence for prevention of sudden outbursts of coal and gas at baring of coal seams by crosscuts.
Sofiyskij Konstantin Konstantinovich, Доктор технічних наук
26-06-2014
The Polyakov Institute of geotechnical mechanics of NAS of Ukraine
Object of study - the processes occurring in a tense gas-saturated coal and rock massive array under hydrodynamic impact it through a borehole drilled from the bottom or intermediate crosscut through the rocks or soil crosscut on the roof coal seam. Purpose - adjustment of the process parameters of the hydrodynamic effects through one borehole on underground coal seams prone to gas dynamic phenomenon before opening them in the mine name is F.E. Dzerzhinsky. Subject of research - the process parameters of the hydrodynamic effects on a busy gas-saturated coal seam prior to its opening. Research methods - analytical, experimental studies for mines. Industry conducted verification method of hydrodynamic impact on the coal seams m3-"Tolstyj - Vostok", m3-"Tolstyj - Zapad", m2-"Tonkij - Zapad" and m2-"Tonkij - Zapad" prone to gas-dynamic phenomena, before opening through one process borehole under SE "Mine name is FE Dzerzhinsky "SE" Dzerzhinskugol." Found that the hydrodynamic impact via one well of 100 mm diameter, drilled through the soil seams breed cork capacity of more than 5 m from the bottom of the normal revealing the excavation section in sinking to 12.3 m2 on the coal seam at the top or at the power cork breed less than 5.0 m, in an amount of 15-30 cycles and of extracting from the processing zone for at least 2% of the coal in the coal seam results in a state on a ground outburst 6,8-10,2 m radius. As a result, industrial test method adjusted parameters of hydrodynamic impuct on coal seam prior to its opening: Number of technological borehole piece .1; The impact of process pressure, 4-5 MPa; The number of cycles, 15-30 cycle; Cycle time, 3-10 min. Opening of coalbed m3-"Tolstuj" m2-"Tonkij" № 42-1146 m sections and № 41-1146 m crosscuts intermediate number 8, № 9, № 17 and № 18 conducted without signs of the gas-dynamic phenomena. Hydrodynamic impact, of technological boreholes, average daily concentrations.
Агаєв Руслан Агагулаєвич
Власенко Василь Вікторович
Гаврилов Вячеслав Іванович
Петух Олександр Петрович
Софійський Костянтин Костянтинович
2020-04-02
Updated: 2025-12-08
Saving a scientific data set occurs in two stages:
1.) Creating a data set
Enter the name of the set, a brief description of the set (annotation), and click the “Create set” button. After that, a draft data set will be automatically created, which you can save for further work with the set. The system will redirect you to the “Data set information” page.
2.) Filling in the data
On the “Data set information” page, you need to fill in all the fields related to the data set and upload the files.
Please note! Each file is uploaded separately. This is done to ensure the stable operation of the system.
Once you have filled in the information about the scientific data set and added the necessary files, you can save the draft or send the data to the system.
Please note! Once the data has been sent, you cannot change it.
Drafts are necessary for storing the data set and editing it before sending.
All accounts on the NRA website go through a standard registration procedure and are verified. However, in order to obtain additional features, such as publishing open reviews of academic texts, verification by affiliation is required.
To obtain the status “verified”, you must change your primary email address to a corporate one, which is tied to a scientific or educational institution.
For example: user@ukrintei.ua, user@nas.gov.ua
After confirming your corporate email address, your account will be automatically verified by affiliation.
If your email address is corporate, but your account does not have a verification mark, you need to write to us at the email address NRAT@ukrintei.ua. After verification, we will add your address to the database, and your account will be verified.
After completing the verification procedure for affiliation, you can change the primary email address to a convenient one for you, without losing your status during the current verification.
You only need to verify for affiliation once.
* We use corporate addresses from the Unified State Database on Education and the State Register of Scientific Institutions Supported by the State
To search for news published on the official website of NRАT in the “News” section, you need to enter one word, several words, or an exact phrase in the search field. Different terms are separated by spaces.
The search is performed everywhere – in the title and the news text.
For a more comprehensive result, it is recommended to use word stems (parts of words without endings).
When using multiple words for the search, they are combined using one of the logical methods described below.
By default, the logical connector “and” is used. In this case, search results will include all news releases that contain the specified words, even if they are located separately from each other and are in different parts of the text.
Example: Search phrase: OECD report. Search result: all news containing the words “report” and “OECD” in the text and in the title, both together and separately.
If a phrase or phrase is enclosed in quotation marks (“), the results will include all publications where this exact phrase or phrase is found.
Example: Search phrase: “OECD report.” Search result: all news containing the exact phrase “OECD report.”
If you know the publication date of the news or are interested in a specific time frame in which they were published on the website, you can select such a date or date range in the additional field that looks like a calendar. The date is entered in the format year-month-day and confirmed by clicking on the corresponding date in the calendar dropdown. You can enter a date or choose one by browsing through the calendar by months and years. By default, the interval starts from the oldest date (2018-01-23) and ends with the current date.
You can also use one or more hashtags, which are located under the search field on the right side of the “News” page.
Please note: The search for academic texts is carried out in a separate search window at the following link https://nrat.ukrintei.ua/searchdb.
