Total number
Full text
Total number
Full text
Number of local repositories
Full text
0215U002542,
0113U005174
,
Synthesis the textured diamond substrates for the production of radiation detectors for radiation dosimetry and support the nuclear technology
Strel'nitskij Vladimir Evgenievich, Доктор фізико-математичних наук
06-01-2016
National Science Center "Kharkiv Institute of Physics and Technology
Scientific report: 35 p., pictures 20, table. 6, 2 references. Object of research - the method of gas-phase chemical vapor deposition the diamond substrates for detectors, detectors of ionizing radiation based on diamond substrates. The aim of the project is improving the methods of the diamond textured substrates synthesis and detectors of ionizing radiation based on polycrystalline diamond films manufacturing and completion of detector tests on the electron accelerator. The method of research is experimental study the influence of surface treatment of silicon wafers on defect structure of diamond coatings, study the effect of the whole process of making the diamond wafers on their electrical properties and characterization of diamond detectors under electronic and gamma irradiation on electron accelerator. Optimization of chemical treatment of the surface of silicon wafers to remove defective surface layer that is formed during its cutting and polishing have been performed. Growth of polycrystalline diamond coatings on the single crystal silicon substrates which have been prepared at optimized conditions of chemical surface treatment, provides 100% yield of diamond substrates. Diamond substrate obtained in optimum conditions have values of specific resistivity 3,7 o 1014 ± 18% ohm ? cm, which practically did not go beyond the value of its error determination. The thickness of the diamond substrate had an average size of 210 ± 10% microns. With the help of radiation-resistant detector which is placed in a ceramic housing it was conducted the profile of an electron beam of accelerator LU-10. It was defined the analog sensitivity of the multichannel coordinate-sensitive detector in the fields of electron and deceleration radiation. A direct measurement of the profile of the electron beam have been made at the output of an electron accelerator. It was conducted the continuous online monitoring of deceleration radiation of electron accelerator LU-10 with the help of multichannel diamond detector and a specially created system of measurements. Detectors based on CVD diamond substrates can be used for technological dosimetry of electron and deceleration radiation in the range of values of absorbed dose rate 3 ... 2500 Gr / s, the energy of electrons and gamma-ray photons 10 ... 40 MeV at a value of radiation resource of diamond detector at least ~ 107 Gr and such diamond detector was implemented in SRK "Accelerator" of NSC KIPT.
Вєрьовкін Андрій Олексійович
Грицина Василь Іванович
Дудник Станіслав Федорович
Кошевий Костянтин Іванович
Кутній Володимир Євдокимович
Наконечний Дмитро Вікторович
Опалев Олег Анатолійович
Пироженко Людмила Олексіївна
Пояркова Світлана Сергійовна
Решетняк Олена Миколаївна
Рибка Олександр Вікторович
Стрельницький Володимир Євгенійович
Уваров Вячеслав Лаврентійович
Чечина Марина Вікторівна
Шляхов Ілля Миколаевич
2020-04-02
Updated: 2025-12-18
Saving a scientific data set occurs in two stages:
1.) Creating a data set
Enter the name of the set, a brief description of the set (annotation), and click the “Create set” button. After that, a draft data set will be automatically created, which you can save for further work with the set. The system will redirect you to the “Data set information” page.
2.) Filling in the data
On the “Data set information” page, you need to fill in all the fields related to the data set and upload the files.
Please note! Each file is uploaded separately. This is done to ensure the stable operation of the system.
Once you have filled in the information about the scientific data set and added the necessary files, you can save the draft or send the data to the system.
Please note! Once the data has been sent, you cannot change it.
Drafts are necessary for storing the data set and editing it before sending.
All accounts on the NRA website go through a standard registration procedure and are verified. However, in order to obtain additional features, such as publishing open reviews of academic texts, verification by affiliation is required.
To obtain the status “verified”, you must change your primary email address to a corporate one, which is tied to a scientific or educational institution.
For example: user@ukrintei.ua, user@nas.gov.ua
After confirming your corporate email address, your account will be automatically verified by affiliation.
If your email address is corporate, but your account does not have a verification mark, you need to write to us at the email address NRAT@ukrintei.ua. After verification, we will add your address to the database, and your account will be verified.
After completing the verification procedure for affiliation, you can change the primary email address to a convenient one for you, without losing your status during the current verification.
You only need to verify for affiliation once.
* We use corporate addresses from the Unified State Database on Education and the State Register of Scientific Institutions Supported by the State
To search for news published on the official website of NRАT in the “News” section, you need to enter one word, several words, or an exact phrase in the search field. Different terms are separated by spaces.
The search is performed everywhere – in the title and the news text.
For a more comprehensive result, it is recommended to use word stems (parts of words without endings).
When using multiple words for the search, they are combined using one of the logical methods described below.
By default, the logical connector “and” is used. In this case, search results will include all news releases that contain the specified words, even if they are located separately from each other and are in different parts of the text.
Example: Search phrase: OECD report. Search result: all news containing the words “report” and “OECD” in the text and in the title, both together and separately.
If a phrase or phrase is enclosed in quotation marks (“), the results will include all publications where this exact phrase or phrase is found.
Example: Search phrase: “OECD report.” Search result: all news containing the exact phrase “OECD report.”
If you know the publication date of the news or are interested in a specific time frame in which they were published on the website, you can select such a date or date range in the additional field that looks like a calendar. The date is entered in the format year-month-day and confirmed by clicking on the corresponding date in the calendar dropdown. You can enter a date or choose one by browsing through the calendar by months and years. By default, the interval starts from the oldest date (2018-01-23) and ends with the current date.
You can also use one or more hashtags, which are located under the search field on the right side of the “News” page.
Please note: The search for academic texts is carried out in a separate search window at the following link https://nrat.ukrintei.ua/searchdb.
