Total number
Full text
Total number
Full text
Number of local repositories
Full text
0219U003010,
0116U004952
,
Development of technologies of construct and local destruction diagnostic by means of optical speckle metrology, phase shifting interferometry and digital holography
Muravsky Leonid, Доктор технічних наук
29-01-2019
Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine
On basis of the developed high-speed method of three-step phase-shifting interferometry, some new methods of reconstruction of surface were created and approved.The method of construction of displacement fields of rough surface by means of the digital Fresnel holography has been developed.The new algorithm of automatic high-speed processing of digital holograms was proposed, and the scheme and software for reconstruction of specimens surface relief after two wavelengths developed. The new optical-digital method of revealing of subsurface defects in the composite panels and joints after dynamic speckle images of tested surface proposed. The new correlation approach to determination of 3D displacement fields of surface with one camcorder, based on the log-polar Fourier-Mellin transformation, was developed. The portable optic-digital correlator created, which was used to determinate the deformation of wall of fuel tank of carrier rocket and to measure the flexure of reinforced concrete structuresof the pedestrian subway on the "Sviatoshyn" underground railway station, Kyiv. The experimental method developed of determination of rigidity of pin and bolted connections"metal-composite", and also the measurement complex to investigate the mashing and elongation of joints created. By the method of small deformations, the elastic hysteresis investigated and the effects of micro- strengthening of pipe low-carbon steels and alloys examined. It was proved that mechanical characteristics of metals at their hydrogenation during action of small deformations can be the base of real estimation of their remaining life.
Іваницький Ярослав Лаврентійович
Бойко Василь Миколайович
Вороняк Тарас Іванович
Гаськевич Георгій Ігорович
Гвоздюк Микола Мар'янович
Дем'янишин Наталія Михайлівна
Джала Василь Романович
Дрималик Андрій Романович
Кметь Аркадій Борисович
Кость Ярослав Павлович
Коцюба Юрій Миколайович
Куць Олександр Григорович
Личак Олег Васильович
Максименко Олександр Парфенович
Мицик Богдан Григорович
Осташ Орест Петрович
Сахарук Олександр Миколайович
Стасишин Ігор Вікторович
Сурядова Ольга Дмитрівна
Штаюра Степан Теодорович
2020-04-02
Updated: 2025-12-07
Saving a scientific data set occurs in two stages:
1.) Creating a data set
Enter the name of the set, a brief description of the set (annotation), and click the “Create set” button. After that, a draft data set will be automatically created, which you can save for further work with the set. The system will redirect you to the “Data set information” page.
2.) Filling in the data
On the “Data set information” page, you need to fill in all the fields related to the data set and upload the files.
Please note! Each file is uploaded separately. This is done to ensure the stable operation of the system.
Once you have filled in the information about the scientific data set and added the necessary files, you can save the draft or send the data to the system.
Please note! Once the data has been sent, you cannot change it.
Drafts are necessary for storing the data set and editing it before sending.
All accounts on the NRA website go through a standard registration procedure and are verified. However, in order to obtain additional features, such as publishing open reviews of academic texts, verification by affiliation is required.
To obtain the status “verified”, you must change your primary email address to a corporate one, which is tied to a scientific or educational institution.
For example: user@ukrintei.ua, user@nas.gov.ua
After confirming your corporate email address, your account will be automatically verified by affiliation.
If your email address is corporate, but your account does not have a verification mark, you need to write to us at the email address NRAT@ukrintei.ua. After verification, we will add your address to the database, and your account will be verified.
After completing the verification procedure for affiliation, you can change the primary email address to a convenient one for you, without losing your status during the current verification.
You only need to verify for affiliation once.
* We use corporate addresses from the Unified State Database on Education and the State Register of Scientific Institutions Supported by the State
To search for news published on the official website of NRАT in the “News” section, you need to enter one word, several words, or an exact phrase in the search field. Different terms are separated by spaces.
The search is performed everywhere – in the title and the news text.
For a more comprehensive result, it is recommended to use word stems (parts of words without endings).
When using multiple words for the search, they are combined using one of the logical methods described below.
By default, the logical connector “and” is used. In this case, search results will include all news releases that contain the specified words, even if they are located separately from each other and are in different parts of the text.
Example: Search phrase: OECD report. Search result: all news containing the words “report” and “OECD” in the text and in the title, both together and separately.
If a phrase or phrase is enclosed in quotation marks (“), the results will include all publications where this exact phrase or phrase is found.
Example: Search phrase: “OECD report.” Search result: all news containing the exact phrase “OECD report.”
If you know the publication date of the news or are interested in a specific time frame in which they were published on the website, you can select such a date or date range in the additional field that looks like a calendar. The date is entered in the format year-month-day and confirmed by clicking on the corresponding date in the calendar dropdown. You can enter a date or choose one by browsing through the calendar by months and years. By default, the interval starts from the oldest date (2018-01-23) and ends with the current date.
You can also use one or more hashtags, which are located under the search field on the right side of the “News” page.
Please note: The search for academic texts is carried out in a separate search window at the following link https://nrat.ukrintei.ua/searchdb.
