Search academic texts

Information × Registration Number 0219U100406, 0117U006187 , R & D reports Title A comparative study of anode structure on efficiency of solid oxide fuel cell operation popup.stage_title Head Brodnikovskа Irynа V., Registration Date 12-02-2019 Organization Institute for Problems in Materials Science popup.description2 The tape casting method was elaborated for manufacturing of SOFC components. The developed SOFC was compared with it commercial analogue. Thus, for manufactured SOFC the peak of power density reached 4.2 mW/cm2 at 800 °С while commercial SOFC demonstrated 2.8 mW/cm2 at the same conditions. The structure optimization of anode substrate was performed via replacement of traditional ceramic component 8YSZ with the stronger - 3,5YSZ. It was established, that this replacement allows to keep required, as for anode substrate, level of mechanical strength with increased porosity. The Ni-3,5YSZ cermet with porosity 44.5%, mechanical strength of 74 MPa and electrical conductivity 1,15 * 10^6 S/cm was obtained. Ceramic scaffold made of 3,5YSZ with porosity at 38% and mechanical strength at 92 MPa were developed. Further impregnation of the scaffold with nickel salt may increase its mechanical strength. Product Description popup.authors popup.nrat_date 2020-04-02 Close