Updated: 2025-12-13
Total number
Full text
Total number
Full text
Number of local repositories
Full text
0222U002067, 0121U113089 , R & D reports
Technology reprocessing of zirconia products with 10 % Y2O3 and pilot batches out put of zirconia products
Halchenko Tetiana Н., к.т.н.
09-02-2022
Joint Stock Company "The Ukrainian Research Institute of Refractories named after A. S. Berezhnoy"
Research object is zirconia (Z) products. Work purpose is technology improvement of Z-products with 10 % Y2O3. Researches methods are chemical, physical-mechanical, petrographic, X-ray phase ones. An influence of Al2O3 additive in the form of 3 grades alumina (calcined and 2 grades of active alumina) and their quantity (up to 4 %) on the main properties of Z-samples with 10 % Y2O3 fired at 1580 ºС was studied. The optimal amount of all studied grades of alumina was established, which ensures the production of fired samples with the highest properties: open porosity 19.8—20.5 %, apparent density 4.74—4.77 g/cm3, cold crushing strength 34—35 N/mm2, thermal shock resistance (1300 ºC — water) 13 thermal cycles. It was shown that, the using of Al2O3 additive in the form of 2 grades of active alumina does not lead to a significant increase in the main properties in comparison with similar characteristics of samples containing calcined alumina additive. Therefore, for economic reasons, preference was given to the latter. The Z-refractories with 10 % Y2O3 technology has been improved, which provides samples with a greater than 13.3 % (relative) cold crushing strength and more than 3.5 times thermal shock resistance (1300 ºC — water) in comparison with similar characteristics of Z-products which are made now. This will ensure a longer service life of Z-refractories in high-temperature units for consumers. Full-scale samples of industrial format products were made, which contain the calcined alumina additive and were characterized by above-mentioned properties and meet the requirements TS. Pilot batches of Z-products with properties that meet the requirements of TS were made and supplied to consumer on the foreign and domestic markets. Work should be continued in the direction of mastering the improved technology of Z-products (with 10 % Y2O3) with the Al2O3 additive and further improvement of the Z-refractories technology, expanding the volume of their production and use
Belik Lyudmyla V.
Protsak Olena B.
2022-03-09
Updated: 2025-12-13
Saving a scientific data set occurs in two stages:
1.) Creating a data set
Enter the name of the set, a brief description of the set (annotation), and click the “Create set” button. After that, a draft data set will be automatically created, which you can save for further work with the set. The system will redirect you to the “Data set information” page.
2.) Filling in the data
On the “Data set information” page, you need to fill in all the fields related to the data set and upload the files.
Please note! Each file is uploaded separately. This is done to ensure the stable operation of the system.
Once you have filled in the information about the scientific data set and added the necessary files, you can save the draft or send the data to the system.
Please note! Once the data has been sent, you cannot change it.
Drafts are necessary for storing the data set and editing it before sending.
All accounts on the NRA website go through a standard registration procedure and are verified. However, in order to obtain additional features, such as publishing open reviews of academic texts, verification by affiliation is required.
To obtain the status “verified”, you must change your primary email address to a corporate one, which is tied to a scientific or educational institution.
For example: user@ukrintei.ua, user@nas.gov.ua
After confirming your corporate email address, your account will be automatically verified by affiliation.
If your email address is corporate, but your account does not have a verification mark, you need to write to us at the email address NRAT@ukrintei.ua. After verification, we will add your address to the database, and your account will be verified.
After completing the verification procedure for affiliation, you can change the primary email address to a convenient one for you, without losing your status during the current verification.
You only need to verify for affiliation once.
* We use corporate addresses from the Unified State Database on Education and the State Register of Scientific Institutions Supported by the State
To search for news published on the official website of NRАT in the “News” section, you need to enter one word, several words, or an exact phrase in the search field. Different terms are separated by spaces.
The search is performed everywhere – in the title and the news text.
For a more comprehensive result, it is recommended to use word stems (parts of words without endings).
When using multiple words for the search, they are combined using one of the logical methods described below.
By default, the logical connector “and” is used. In this case, search results will include all news releases that contain the specified words, even if they are located separately from each other and are in different parts of the text.
Example: Search phrase: OECD report. Search result: all news containing the words “report” and “OECD” in the text and in the title, both together and separately.
If a phrase or phrase is enclosed in quotation marks (“), the results will include all publications where this exact phrase or phrase is found.
Example: Search phrase: “OECD report.” Search result: all news containing the exact phrase “OECD report.”
If you know the publication date of the news or are interested in a specific time frame in which they were published on the website, you can select such a date or date range in the additional field that looks like a calendar. The date is entered in the format year-month-day and confirmed by clicking on the corresponding date in the calendar dropdown. You can enter a date or choose one by browsing through the calendar by months and years. By default, the interval starts from the oldest date (2018-01-23) and ends with the current date.
You can also use one or more hashtags, which are located under the search field on the right side of the “News” page.
Please note: The search for academic texts is carried out in a separate search window at the following link https://nrat.ukrintei.ua/searchdb.