Total number
Full text
Total number
Full text
Number of local repositories
Full text
0223U000849,
0121U109166
,
Investigation, development and optimization of linear ion accelerators (based on alternating phase focusing and H-resonators) for power engineering, nuclear physics and radiation technologies. Research and application of transient, parametric and characteristic X-ray radiation
Manujlenko Oleg V., Кандидат фізико-математичних наук
20-01-2023
National Science Center "Kharkiv Institute of Physics and Technology"
The purpose of the work is the development of accelerators and their use in atomic and thermonuclear energy. The sputtering yields (SY) were calculated for W and EI-993 steel when they were irradiated with helium ion beams at energies of 120 keV and 4 MeV. SY for W is determined by main element - W, the content of which in studied samples is ≥ 99.5%. SY of steel EI - 993 is determined by iron and chromium, the content of which is 12%. It was calculated spatial profiles of helium deposition, damage, ionization, and phonon excitation in W and EI-993. The spectra and spatial distribution of secondary particles in a target made of natural uranium during its irradiation with beams of protons, deuterons, and carbon were studied. Experimental data compared with calculations (Geant4 and MARS15 codes). The results of experiments on ionization energy loss of protons in the depleted layer of a silicon detector, the thickness of which was smoothly adjusted in the range from 0.3 to 10 mm, are presented. Experiments confirm the validity of the Landau theory, taking into account the noise of the spectrometer, but the experimental width of the Landau peak systematically exceeds the calculated one. A piezoelectric accelerator built on quartz crystals as piezoelectric elements was studied. It has been shown experimentally that efficiency of such an accelerator strongly depends on the capacitance of the piezoelectric element. The piezoelectric accelerator is built on piezoelectrics with a large capacity, giving a higher charge to high-voltage electrode and providing a higher efficiency of the accelerator. A solenoid was developed for the helium ion beam transportation line from the injector (120 keV) to the POS-4 accelerator (4 MeV), its power supply system, as well as a camera for irradiating samples of structural materials with helium ions with an energy of 120 keV. The irradiation chamber and solenoid will allow several times the current of helium ions on the irradiated targets.
Voronko Volodymyr O.
Zajtsev Borys V.
Manuilenko Oleh V.
Sotnikov Volodymyr V.
Tishkin Sergii S.
Shchagin Oleksandr V.
2023-01-20
Updated: 2025-12-20
Saving a scientific data set occurs in two stages:
1.) Creating a data set
Enter the name of the set, a brief description of the set (annotation), and click the “Create set” button. After that, a draft data set will be automatically created, which you can save for further work with the set. The system will redirect you to the “Data set information” page.
2.) Filling in the data
On the “Data set information” page, you need to fill in all the fields related to the data set and upload the files.
Please note! Each file is uploaded separately. This is done to ensure the stable operation of the system.
Once you have filled in the information about the scientific data set and added the necessary files, you can save the draft or send the data to the system.
Please note! Once the data has been sent, you cannot change it.
Drafts are necessary for storing the data set and editing it before sending.
All accounts on the NRA website go through a standard registration procedure and are verified. However, in order to obtain additional features, such as publishing open reviews of academic texts, verification by affiliation is required.
To obtain the status “verified”, you must change your primary email address to a corporate one, which is tied to a scientific or educational institution.
For example: user@ukrintei.ua, user@nas.gov.ua
After confirming your corporate email address, your account will be automatically verified by affiliation.
If your email address is corporate, but your account does not have a verification mark, you need to write to us at the email address NRAT@ukrintei.ua. After verification, we will add your address to the database, and your account will be verified.
After completing the verification procedure for affiliation, you can change the primary email address to a convenient one for you, without losing your status during the current verification.
You only need to verify for affiliation once.
* We use corporate addresses from the Unified State Database on Education and the State Register of Scientific Institutions Supported by the State
To search for news published on the official website of NRАT in the “News” section, you need to enter one word, several words, or an exact phrase in the search field. Different terms are separated by spaces.
The search is performed everywhere – in the title and the news text.
For a more comprehensive result, it is recommended to use word stems (parts of words without endings).
When using multiple words for the search, they are combined using one of the logical methods described below.
By default, the logical connector “and” is used. In this case, search results will include all news releases that contain the specified words, even if they are located separately from each other and are in different parts of the text.
Example: Search phrase: OECD report. Search result: all news containing the words “report” and “OECD” in the text and in the title, both together and separately.
If a phrase or phrase is enclosed in quotation marks (“), the results will include all publications where this exact phrase or phrase is found.
Example: Search phrase: “OECD report.” Search result: all news containing the exact phrase “OECD report.”
If you know the publication date of the news or are interested in a specific time frame in which they were published on the website, you can select such a date or date range in the additional field that looks like a calendar. The date is entered in the format year-month-day and confirmed by clicking on the corresponding date in the calendar dropdown. You can enter a date or choose one by browsing through the calendar by months and years. By default, the interval starts from the oldest date (2018-01-23) and ends with the current date.
You can also use one or more hashtags, which are located under the search field on the right side of the “News” page.
Please note: The search for academic texts is carried out in a separate search window at the following link https://nrat.ukrintei.ua/searchdb.
