Search academic texts

Information × Registration Number 2111U000703, Article popup.category Стаття Title popup.author popup.publication 01-01-2011 popup.source_user Сумський державний університет popup.source http://essuir.sumdu.edu.ua/handle/123456789/9294 popup.publisher Sumy State University Publishing Description The optimization process of laser scribing of back contacts is carried out by varying different parameters of laser and thickness of Molybdenum (Mo) thin-films. Mo thin films were deposited by RF magnetron sputtering on the organically cleaned soda lime glass substrate. The thickness of Mo was in the range of 60 nm to 800 nm. For the scribing process the laser power and the laser pulse frequency were varied. Different thickness of Mo shows the different scribe behavior. The optimized process provides a successful isolative laser scribing, having a minimum scribe line width, of Mo layer on glass substrate without any presence of walls, ridges, or collars in scribed areas. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/9294 popup.nrat_date 2025-03-24 Close