Search academic texts

Information × Registration Number 2113U001585, Article popup.category Thesis Title popup.author popup.publication 01-01-2013 popup.source_user Сумський державний університет popup.source http://essuir.sumdu.edu.ua/handle/123456789/35201 popup.publisher Sumy State University Description Composite nanofibers containing single-walled carbon nanotubes (SWNT) were prepared by using elec-trospinning technique and hydrogen adsorption/desorption isotherms were carried out by a Sieverts appa-ratus at room temperature. The SEM analysis of the nanofibers revealed that the deformation of the nano-fiber increases with increasing SWNT concentration. The diameter of neat nanofibers was below 200 nm and had smooth surface. The surface of the composite nanofibers was rough even by adding low quantity of SWNT. The hydrogen storage results showed an improvement in the adsorption capacity with increasing the SWNT content in composite nanofibers. These nanofibers were evacuated again to remove the ad-sorbed hydrogen at room temperature. Moreover, even though specific surface area and total pore volume were important factors for increasing the capacity of hydrogen adsorption. Finally, maximum adsorption capacity was 0.29 wt % in case of nanofibers with 10 wt % SWNT under 30 bar at 298 K. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35201 popup.nrat_date 2025-05-12 Close