Registration Number
0215U001472,
0110U005739
, R & D reports
Title
"Weldability of advanced aluminium materials with highly-dispersed and nanocrystalline structure, investigation of their transformations at thermomechanical joining cycles" (Section 2) under the integrated programs "Fundamental problems of welding aluminium alloys with a dispersed and nanoquasicrystalline structure for application and temperatures elevated up to 300 C"
popup.stage_title
Head
Falchenko Iurii Vyacheslavovich,
Registration Date
03-03-2015
Organization
E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine
popup.description2
Influence of configuration of tool shoulder and pin working surfaces on weld formation quality was studied, and design of the tool for friction stir welding of sheet (0.8-3.0 mm) aluminium alloys was developed. Influence of the main welding process parameters, namely angle of tool inclination relative to the vertical axis and force of tool pressing to the surface of the edges being welded, speed of tool rotation and linear displacement, depth of its shoulder immersion into the metal being welded and depth of tool pin penetration into the butt, on weld formation quality was analyzed. Optimum parameters of FSW process were established, which allow producing sound welds on nanostructured quasicrystalline aluminium alloys of Al-Fe-Cr system. Optimum ranges of welding speed variation were determined, at which maximum temperature of metal heating in the zone of permanent joint formation does into exceed 450 C that provides sound formation, dispersed and dense structure of welds and allows preserving the quasicrystalline shape of metastable particles in alloys of Al-Fe-Cr system. Mechanical properties and structural features of typical joints of nanostructured quasicrystalline aluminium alloys obtained by stir friction welding were determined.
Product Description
popup.authors
Покляцький Анатолій Григорович
Федорчук Віктор Євгенович
popup.nrat_date
2020-04-02
