Registration Number
0226U001144,
(0123U100101)
, R & D reports
Title
Study of the peculiarities of forming the structure and properties of high-strength thick-rolled steel sheets made of low-alloy steels
popup.stage_title
Розробка моделі розрахунку методом скінчених елементів зміни температури по перерізу листа товщиною більше 40 мм зі сталі удосконаленого хімічного складу в процесі термічної обробки. Встановлення за допомогою розробленої моделі особливостей впливу зміни хімічного складу на умови розпаду аустеніту при охолодженні листів більше 40 мм за перерізом. Дослідження за допомогою розробленої моделі особливостей впливу зміни параметрів термічної обробки на механічні властивості товстолистового прокату. Розробка рекомендацій параметрів технології зміцнюючої термічної обробки з окремого нагріву, що забезпечує розпад аустеніту у встановленому діапазоні швидкостей охолодження.
Head
Kononenko Hanna A., Доктор технічних наук
Registration Date
21-01-2026
Organization
Institute of Ferrous Metallurgy. ZI Nekrasov of the National Academy of Sciences of Ukraine
popup.description1
On the basis of establishing the peculiarities of the processes of structure formation and phase transformations, develop technological solutions for obtaining high-strength thick-rolled products of responsible purpose from low-alloy steel.
popup.description2
An analysis of current global and domestic approaches to the production of high-strength thick-sheet rolled steel was performed, modern requirements for the complex of properties of such sheets were determined, and the feasibility of forming a structure of highly dispersed carbide-free bainite and homogeneous tempering sorbite was substantiated. Promising chemical compositions of steels were developed, ensuring the formation of the target structure in combination with rational heat treatment, as well as achieving high mechanical properties in thick sections. Rational modes of introducing alloying elements into the melt were established, which allows obtaining liquid steel of stable chemical composition while simultaneously reducing the negative impact of non-metallic inclusions. Ingots of experimental chemical composition were manufactured in laboratory conditions and their comprehensive study was conducted in the cast, hot-formed, and heat-treated state. The regularities of the influence of the chemical composition and structural state on the service and operational (corrosion resistance, resistance to impact and abrasive wear) properties of steels intended for thick sheet rolling have been established. Critical temperatures and regularities of the kinetics of austenite decomposition at different cooling rates, which ensure the formation of specified structures, have been established. A finite element calculation model of the temperature distribution across the sheet cross-section during heat treatment has been developed and the influence of changes in the chemical composition and heat treatment parameters on the conditions of phase transformations and mechanical properties of the rolled product has been investigated. Based on the results of the work, recommendations have been formulated regarding the parameters of strengthening heat treatment with separate and rolling heating, which ensure controlled austenite decomposition in a given range of cooling rates and a
Product Description
popup.authors
Yushkevich Pavlo O.
Semykin Serhii I.
Anatolii H. Cherniatevych
Lavr S. Molchanov
Rott Nataliia O.
Sehii Y. Samokhvalov
Hanna A. Kononenko
Anna А. Semykina
Maksym A. Kovzel
Vakulchuk Volodymyr V.
Dudchenko Serhii O.
Kimstach Tetiana V.
Oleksandr І. Babachenko
Safronov Oleksandr
Olena A. Shpak
Tetiana S. Holub
Viacheslav M. Kuzmychov
Nadiia S. Riaskova
Dementieva Zhanna A.
Olha P. Klynova
Yevhenii S. Kakushkin
Safronova Olena А.
Puchykov Oleksandr V
Rostyslav V. Podolskyi
Nataliia Y. Filonenko
Bahrova Yuliia
Viktor V. Martsynishyn
popup.nrat_date
2026-01-21
