Пошук академічних текстів

Інформація × Реєстраційний номер 2123U002423, Матеріали видань та локальних репозитаріїв Категорія Бакалаврська робота Назва роботи Manufacturing Process Planning for a part "Pump Housing" Автор Mansour Belal Elsayed Mohamed Salem Дата публікації 01-01-2023 Постачальник інформації Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського» Першоджерело https://ela.kpi.ua/handle/123456789/62131 Видання Kyiv Опис The bachelor's thesis on the topic Manufacturing Process Planning for a part "Pump Housing" consists of 78 sheets of A4 format and contains 39 illustrations, and 3 tables. The work includes 10 references to guidelines, manuals, books, and catalogues. The objective of this thesis is the development of the manufacturing process for the “Pump Housing” part. In the first chapter analysis of the tool deflection error during end milling operation was performed. In the second chapter, a sequence of manufacturing operations was developed, including selection of CNC machine, cutting tools, cutting conditions and control program. In the third chapter, the vise was selected for the manufacturing operation, calculation of the clamping force was performed and corresponding setup was developed. In the forth chapter, economic calculations were performed for the first manufacturing operation. The graphic part consists of 6 sheets of A1 format, as follows: 1. Analysis of the tool deflection error for the end milling operation 2. Drawings and 3D models of the “Pump Housing” part and blank 3. Manufacturing operation presentation for the first setup 4. Manufacturing operation presentation for the second setup 5. Fixture setup for the manufacturing operation 6. Results of CNC code development Додано в НРАТ 2025-01-29 Закрити