Пошук академічних текстів

Інформація × Реєстраційний номер 2123U003870, Матеріали видань та локальних репозитаріїв Категорія Бакалаврська робота Назва роботи Manufacturing Process Planning for a part "Adapter" Автор Kareem Sobhy Mohamed Gomaa Mohamed Дата публікації 01-01-2023 Постачальник інформації Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського» Першоджерело https://ela.kpi.ua/handle/123456789/62128 Видання Kyiv Опис The bachelor's thesis is on the topic «Manufacturing Process Planning for a part "Adapter"». It consists of 96 sheets of A4 format. In the first chapter, determination of the value of the linear elastic deformation of the shaft during turning was evaluated. Elements of the cutting force were calculated according to the analytical equation and CAE system was utilized to estimate the displacement of the shaft. The objective of this work is development of the manufacturing process for the "Adapter " part. First, the drawing of a part was analyzed and a 3D model was developed using CAD software. Next steps include: development of the sequence of machining operations, selection of CNC machine and a workpiece clamping device, as well as cutting tools, and cutting conditions. The control program for CNC machine was developed using CAM software. Economic calculations were performed for the first manufacturing operation. The graphic part consists of 6 sheets of Al format, as follows: 1. Determination of the value of the linear elastic deformation of the shaft during turning 2. Drawings and 3D models of the " Adapter " part and blank 3. Manufacturing operation presentation for the first setup 4. Manufacturing operation presentation for the second setup 5. Design of the workpiece clamping device 6. Results of CNC code development Додано в НРАТ 2025-01-29 Закрити