Total number
Full text
Total number
Full text
Number of local repositories
Full text
0220U002039,
0119U002571
,
Development of a system of tests of typical types of weapons and military equipment of Ukraine according to NATO standards for electromagnetic compatibility.
Volodymyr Kniaziev,
12-02-2020
National Technical University "Kharkiv Polytechnical Institute" Research & Desing Institute ''Molniya"
Object of study - Generation of electromagnetic phenomena with normalized parameters, their influence on the electronic, radio-electronic and electro technical equipment of armaments and military equipment (ME) for assessment of compliance with the requirements of current standards. Purpose - To establish in Ukraine a national system for assessing the conformity of ME samples with the requirements of NATO standards on electromagnetic compatibility (EMC). Research Methods - Computer simulation of the operation of the generator circuits; development of a generator control program for the microprocessor; creation of the experimental sample of the generator, verification of the parameters of the generator. Results and novelty - Experimental samples of specialized electromagnetic disturbance generators based on two types of tests of the resistance of the ME to external electromagnetic influence have been created: - G-NRS01, magnetic field generator in the frequency range from 30 Hz to 100 kHz with power up to 180 dB; -G-NL254-E, a pulsed electric field generator that accompanies a lightning strike. An experimental sample of a measuring instrument has been developed to determine the level of conductive interference from the equipment under test by the NCE01 test type from the Standard NATO AECTP 500: 2016, in an electrical power supply in the frequency range from 30 Hz to 10 kHz. Scope - Assessment of compliance of ME equipment with the current requirements of NATO standards on EMC parameters. Cost-effectiveness of work is to increase the competitiveness of ME samples produced in Ukraine on the world market. Proposals for the development of the study object - development of a complete set of generators to establish in Ukraine a system of conformity assessment of armaments and military equipment to the modern requirements of NATO standards on electromagnetic compatibility by conducting tests.
Євсеєв Ігор Михайлович
Апремова Тетаня Михайлівна
Баранов Михайло Іванович
Буряковський Сергій Геннадійович
Гученко Олександр Іванович
Князєв Володимир Володимирович
Кравченко Володимир Іванович
Лісной Іван Петрович
Лось Нина Трохімівна
Мельников Петро Миколайович
Немченко Юрий Семенович
Носко Леонід Володимирович
Островерх Тетяна Миколаївна
Понуждаєва Олена Геннадієвна
Сараєв Олександр Іванович
Сафнюк Галина Юріївна
Сомхієв Сергій Борисович
Танцура Олександр Іванович
Чернухін Олександр Юрійович
Яковенко Ігор Володимирович
2020-04-02
Updated: 2025-12-07
Saving a scientific data set occurs in two stages:
1.) Creating a data set
Enter the name of the set, a brief description of the set (annotation), and click the “Create set” button. After that, a draft data set will be automatically created, which you can save for further work with the set. The system will redirect you to the “Data set information” page.
2.) Filling in the data
On the “Data set information” page, you need to fill in all the fields related to the data set and upload the files.
Please note! Each file is uploaded separately. This is done to ensure the stable operation of the system.
Once you have filled in the information about the scientific data set and added the necessary files, you can save the draft or send the data to the system.
Please note! Once the data has been sent, you cannot change it.
Drafts are necessary for storing the data set and editing it before sending.
All accounts on the NRA website go through a standard registration procedure and are verified. However, in order to obtain additional features, such as publishing open reviews of academic texts, verification by affiliation is required.
To obtain the status “verified”, you must change your primary email address to a corporate one, which is tied to a scientific or educational institution.
For example: user@ukrintei.ua, user@nas.gov.ua
After confirming your corporate email address, your account will be automatically verified by affiliation.
If your email address is corporate, but your account does not have a verification mark, you need to write to us at the email address NRAT@ukrintei.ua. After verification, we will add your address to the database, and your account will be verified.
After completing the verification procedure for affiliation, you can change the primary email address to a convenient one for you, without losing your status during the current verification.
You only need to verify for affiliation once.
* We use corporate addresses from the Unified State Database on Education and the State Register of Scientific Institutions Supported by the State
To search for news published on the official website of NRАT in the “News” section, you need to enter one word, several words, or an exact phrase in the search field. Different terms are separated by spaces.
The search is performed everywhere – in the title and the news text.
For a more comprehensive result, it is recommended to use word stems (parts of words without endings).
When using multiple words for the search, they are combined using one of the logical methods described below.
By default, the logical connector “and” is used. In this case, search results will include all news releases that contain the specified words, even if they are located separately from each other and are in different parts of the text.
Example: Search phrase: OECD report. Search result: all news containing the words “report” and “OECD” in the text and in the title, both together and separately.
If a phrase or phrase is enclosed in quotation marks (“), the results will include all publications where this exact phrase or phrase is found.
Example: Search phrase: “OECD report.” Search result: all news containing the exact phrase “OECD report.”
If you know the publication date of the news or are interested in a specific time frame in which they were published on the website, you can select such a date or date range in the additional field that looks like a calendar. The date is entered in the format year-month-day and confirmed by clicking on the corresponding date in the calendar dropdown. You can enter a date or choose one by browsing through the calendar by months and years. By default, the interval starts from the oldest date (2018-01-23) and ends with the current date.
You can also use one or more hashtags, which are located under the search field on the right side of the “News” page.
Please note: The search for academic texts is carried out in a separate search window at the following link https://nrat.ukrintei.ua/searchdb.
