Total number
Full text
Total number
Full text
Number of local repositories
Full text
0220U102281,
0118U002340
,
Scientific fundamentals of energy efficiency improvement of thermal technologies for the production of alternative fuels.
Korinchuk Dmytro M,
11-03-2020
Institute of Engineering Thermophysics of NAS of Ukraine
The thermal decomposition of various types of biofuels with variable quality of atmosphere in the decomposition zone was investigated in the work. The analysis of thermal decomposition processes of granular biofuels made from raw materials, crushed to varying degrees of dispersion and activated in various ways before or during the granulation process is carried out. Data were obtained on the kinetic parameters of moisture desorption and non-isothermal decomposition of hemicelluloses of plant, wood biomass and lowland peat. The kinetics of moisture exchange in the regime of low-temperature dehydration of energy willow was studied. The physical and mathematical model of the dynamics of diffusion-filtration heat and mass transfer, phase changes and shrinkage during dehydration of colloidal capillary-porous materials is developed. The expediency of lengthening the residence time of the liquid on the plates of the column equipment to a point close to the equilibrium state of the phases is practically proved. The expediency of using the method of discrete-pulse input of energy (DPІE) for reducing energy and resource consumption in the process of preliminary preparation of raw materials for hydrolysis in bioethanol production technology is substantiated. The assumption about the expediency of using the DPІE method for the intensification of the heat engineering processes of the re-esterification of vegetable oils and the reduction of energy consumption in the technology of diesel biofuel production is substantiated. The use of the results of work and its development will enable to increase energy efficiency of bioenergy conversion by means of intensification of heat and mass exchange and physico-chemical processes of obtaining biofuels, reducing the thermal and technological parameters necessary for carrying out heat engineering processes.
Azarov Serhii P
Bazieiev Rostyslav Ye
Bulii Yurii V.
Grabova Tatyana L.
Husarova Olena V.
Dabizha Nataliіa O
Danko Ivan O
Dakhnenko Valerii L.
Dmytrenko Nataliya V
Dolinskyi Anаtolii A.
Kovalov Vladyslav V
Korinchevska Tetiana V
Mykhailyk Viacheslav A
Obodovich Oleksandr M.
Pereyaslavtseva Elena O.
Petrova Zhanna O.
Posunko Dmytro V.
Sidorenko Vitalii V.
Silnyagina Nina B.
Slobodianiuk Kateryna S.
Snezhkin Yury F.
Sorokova Nataliia M
Stepanova Olesia Ye.
Khomenko Valentyna O
Chalaiev Dzhamalutdin M.
Shapar Рaisа O
Shmatok Alexey I.
2020-04-02
Updated: 2025-12-06
Saving a scientific data set occurs in two stages:
1.) Creating a data set
Enter the name of the set, a brief description of the set (annotation), and click the “Create set” button. After that, a draft data set will be automatically created, which you can save for further work with the set. The system will redirect you to the “Data set information” page.
2.) Filling in the data
On the “Data set information” page, you need to fill in all the fields related to the data set and upload the files.
Please note! Each file is uploaded separately. This is done to ensure the stable operation of the system.
Once you have filled in the information about the scientific data set and added the necessary files, you can save the draft or send the data to the system.
Please note! Once the data has been sent, you cannot change it.
Drafts are necessary for storing the data set and editing it before sending.
All accounts on the NRA website go through a standard registration procedure and are verified. However, in order to obtain additional features, such as publishing open reviews of academic texts, verification by affiliation is required.
To obtain the status “verified”, you must change your primary email address to a corporate one, which is tied to a scientific or educational institution.
For example: user@ukrintei.ua, user@nas.gov.ua
After confirming your corporate email address, your account will be automatically verified by affiliation.
If your email address is corporate, but your account does not have a verification mark, you need to write to us at the email address NRAT@ukrintei.ua. After verification, we will add your address to the database, and your account will be verified.
After completing the verification procedure for affiliation, you can change the primary email address to a convenient one for you, without losing your status during the current verification.
You only need to verify for affiliation once.
* We use corporate addresses from the Unified State Database on Education and the State Register of Scientific Institutions Supported by the State
To search for news published on the official website of NRАT in the “News” section, you need to enter one word, several words, or an exact phrase in the search field. Different terms are separated by spaces.
The search is performed everywhere – in the title and the news text.
For a more comprehensive result, it is recommended to use word stems (parts of words without endings).
When using multiple words for the search, they are combined using one of the logical methods described below.
By default, the logical connector “and” is used. In this case, search results will include all news releases that contain the specified words, even if they are located separately from each other and are in different parts of the text.
Example: Search phrase: OECD report. Search result: all news containing the words “report” and “OECD” in the text and in the title, both together and separately.
If a phrase or phrase is enclosed in quotation marks (“), the results will include all publications where this exact phrase or phrase is found.
Example: Search phrase: “OECD report.” Search result: all news containing the exact phrase “OECD report.”
If you know the publication date of the news or are interested in a specific time frame in which they were published on the website, you can select such a date or date range in the additional field that looks like a calendar. The date is entered in the format year-month-day and confirmed by clicking on the corresponding date in the calendar dropdown. You can enter a date or choose one by browsing through the calendar by months and years. By default, the interval starts from the oldest date (2018-01-23) and ends with the current date.
You can also use one or more hashtags, which are located under the search field on the right side of the “News” page.
Please note: The search for academic texts is carried out in a separate search window at the following link https://nrat.ukrintei.ua/searchdb.
