Search academic texts

Information × Registration Number 2112U001426, Article popup.category Thesis Title popup.author popup.publication 01-01-2012 popup.source_user Сумський державний університет popup.source http://essuir.sumdu.edu.ua/handle/123456789/35065 popup.publisher Sumy State University Description Properties of SBR compounds filled with two kinds of filler, Epoxy-Polyester Hybrid resin(EPH) (10, 20, 30, 40 phr) and Nanoclay (Closite 15 A) (1, 3, 5, 7 phr) were studied. Microcomposite samples and nanocomposite samples were prepared by Haake internal mixer. Curing agents and additives i.e. dicumylperoxide Properties of SBR compounds filled with two kinds of filler, Epoxy-Polyester Hybrid resin(EPH) (10, 20, 30, 40 phr) and Nanoclay (Closite 15 A) (1, 3, 5, 7 phr) were studied. Microcomposite samples and nanocomposite samples were prepared by Haake internal mixer. Curing agents and additives i.e. containing 30 phr resin show higher value of modulus than sample containing 7 phr nanocaly. Rheological measurement showed that both fillers lead to an increase in viscosity and dynamic modulus of samples which is as a result of good interaction established between polymer/filler. Moreover, due to nanometer scale of nanoclay particles, reinforcing effect of Nanoclay was more noticeable and in micrometer scale of Epoxy-Polyester Hybrid particles, Epoxy resin cured by Polyester is used to improved wet ability of SBR compounds. SEM photomicrographs of cryogenically fractured samples confirmed the mentioned results. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35065 popup.nrat_date 2025-05-12 Close