Пошук академічних текстів

Інформація × Реєстраційний номер 2118U002261, Матеріали видань та локальних репозитаріїв Категорія Стаття Назва роботи Improving the Wear Resistance of Thermally Sprayed Nanocomposite Cr3C2-25NiCr Coatings by Pulsed Plasma Treatment Автор Дата публікації 01-01-2018 Постачальник інформації Сумський державний університет Першоджерело http://essuir.sumdu.edu.ua/handle/123456789/71671 Видання Sumy State University Опис In this study the surfaces of thermally sprayed nanocomposite Cr3C2-25NiCr coating have been treated by the pulsed plasma. The nanocomposite Cr3C2-25NiCr coating was deposited by a new multi-chamber gas-dynamic accelerator on grit blasted steel substrate. An automatic pulse-plasma device “Impulse-6” was employed to plasma treatment the surface of Cr3C2-25NiCr coating. The microstructure and wear resistance of the surface of the nanocomposite Cr3C2-NiCr coating before and after the pulsed plasma treatment (PPT) was studied in this paper. Wear tests were carried out using a computer controlled pin-on-disc type tribometer at 25 ºC. The specific wear rate of the nanocomposite Cr3C2-25NiCr coating after PPT is approximately four times less than that of the Cr3C2-25NiCr coating before PPT, indicating that the nanocomposite Cr3C2-25NiCr coating after PPT exhibits better wear resistance. Detailed analysis indicates that the enhanced wear resistance of the nanocomposite Cr3C2-25NiCr coating after PPT is mainly attributed to the formation of an oxide tribolayer and smoother surface, which result from the dense and amorphous microstructure of the coating. Додано в НРАТ 2025-03-24 Закрити